December 07, 2017

08/12/2017: Geelen Counterflow’s sustainability focused electrical dryer

Early in 2018 Geelen Counterflow will introduce its new generation of Electrical Dryers to the market

Following four years of development, the first Electrical Dryer for 10-12 tph extruded petfood will be built and delivered in 2018. 

 
www.geelencounterflow.com
Pilot line testing on extruded petfood during 2016 has shown that energy efficiency can be improved by up to 65 percent, to well below 1000 kJ per kg of evaporated water, compared to the typical 2700 kJ/kg for a counterflow dryer on natural gas or steam.

When the energy for the new Electrical Dryer is from renewable sources, the CO2 footprint of the drying process can be virtually eliminated. The dryer is typically the single biggest energy consumer in an extrusion line, so any attempt to reduce energy consumption or improve the CO2 footprint of extrusion plants should start with the dryer.

The air system of the Electrical Dryer uses high temperature heat pumps to generate hot air of 125 degrees Celsius. As an option the same air system can be fitted with full capacity gas burners for boosting of hot air temperatures.

Geelen Counterflow’s mission is to build the best dryers and coolers for the feed and food industry and to be 100 percent sustainable in doing so. Enabling operators of extrusion lines to dry their products without the use of fossil fuels is a big part of that mission.

Official market launch of the Electrical Dryer will be during Victam Asia 2018 (March 27-29, 2018).

Visit the Galeen Counterflow website, HERE.
 

The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine Milling and Grain
which is published by Perendale Publishers Limited.


For additional daily news from milling around the world: global-milling.com

No comments:

Post a Comment




See our data and privacy policy Click here